ASG Jergens 685001071 Connector Cable FIAM TOM Control Unit - Manual

ASG, Division of Jergens, Inc.
Jergens Way, 15700 South Waterloo Road
Cleveland, Ohio 44110-3898
US Contact Toll-free: (888) 486-6163 • Local: (216) 486-6163 • Fax: (216) 481-4519
Email: [email protected]
Item # 685001071, Connector Cable FIAM TOM Control UnitTool Locking/Unlocking Device
QUOTE
Connector Cable FIAM TOM Control UnitTool Locking/Unlocking Device
OPTIONAL COMPONENT for Single Tool Systems: Connector Cable TOM Control Unit <-> Tool
Locking/Unlocking Device
Not required for Basic Single Tool Systems. Premium Single Tool Systems must include the appropriate Tool
Locking/Unlocking Device (and required Connector Cable) to ensure damage prevention in the case that the auto shut-off
tool exceeds the maximum allowable rundown time. This situation would be typically associated with a fastener problem
such as using the wrong screw size, stripped threads, or improper fastener installation. The Tool Locking/Unlocking
Device shuts down the tool if the maximum allowable rundown time is exceeded, tool reset is required.
(1) Connector Cable TOM Control Unit <-> Tool Locking/Unlocking Device is required for the Fiam 2CS ported air tool with
a Premium TOM Single Tool System.
Additional equipment required. Accessories are available. Please see FIAM TOM Equipment & Accessories for more
information.
· CLASSIFICATION · SPECIFICATIONS · FOR USE WITH:
CLASSIFICATION
Category
Performance Red
Unsurpassed Error-Proofing
ESD Safe
No
SPECIFICATIONS
Model No.
6F0876
FOR USE WITH:
For Use with
685001062, FIAM TOM Control Unit
685001069, FIAM TOM Tool Locking/Unlocking Device for 15C/26C
865001070, FIAM TOM Tool Locking/Unlocking Device for AD/AG/CY
4/13/2014 | Page 1 of 1