Canon ImageCLASS MF8180c - Manual (Page 29)

Setting Up a Computer for Printing 2-18
Sp
ec
ifyin
g
th
e Ne
twor
k Set
tin
gs
2
6
If you are using LPD, change the port configuration information.
❑
Click the [Ports] tab to display the [Ports] sheet.
❑
Click [Configure Port].
❑
Select [LPR] under [Protocol], enter “lp” in [Queue Name] under [LPR Settings]
➞
click [OK].
NOTE
If you are using Raw, this step is not required as the default protocol setting is
[RAW SETTINGS].
7
Click [OK] to enable the settings.
The printer destination settings are complete.