Cabletron Systems W85 - Manual (Page 39)

Network Tools
HSIM-W85 User’s Guide 4-9
wanpq
Syntax: wanpq
wanpq -ea
wanpq -da
wanpq -aip <IPADDRESS>
wanpq -dip <IPADDRESS>
Description: WAN IP Priority Queuing is used to prioritize IP packets
from a specified IP address. IPADDRESS is the Internet
Protocol (IP) address being added to or removed from the
Wide Area Network Priority Queue database.
Options: wanpq (with no options) displays information on the
status of the WAN priority queue.
-ea enables the WAN Priority Queue Application.
-da disables the WAN Priority Queue Application.
-aip <IPADDRESS> adds the IP address designated by
IPADDRESS to the WAN Priority Queue database.
-dip <IPADDRESS> deletes the IP address designated by
IPADDRESS from the WAN Priority Queue database.
Example:
-> wanpq
2689_1
#
#WAN Priority Queue Status: Disabled
#
#Maximum number of address entries: 16
#
#Current number of address entries programmed: 0
#
-> wanpq -ea
#
# WAN Priority Queue Application enabled.
->