Crimestopper Security Products EZ-3 - Manual (Page 13)

13
VEHICLE #2
Press side button
first, then you have
4 seconds to
control vehicle #2.
FLASH LIGHT
2-VEHICLE OPERATION & PROGRAMMING
A single Remote Control can control two different vehicles.
SETUP:
Follow the “Transmitter Programming” steps on the second vehicle below. Program Car #2’s existing remotes, then
quickly press the Car #2 side button on your remote before pressing the lock button on your remote to program it to
Car #2. Once your remote is programmed to the second vehicle, press the car #2 side button on your remote first,
and within 3 seconds press any of the 4 function buttons on your remote. You can keep pressing function buttons to
control car #2 as long as it is within the 3-second window. After 3 seconds have elapsed, the remote will revert
back to Car #1 control.