CHIEF 129 - Manual (Page 5)

MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
1
8
7
6
5
4
3
9
2
8
1
7
6
5
4
3
9
2
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Mercedes Front 129 Series
Mercedes Rear 129 Series
Application Instructions:
1. Remove conventional clamp jaws.
2. Install universal adapter base as shown above.
3. Install pin plate adapter with spacers on opposite side of clamp.
4. Install washers (090784) on adapter base as shown.
5. Insert outer support pin into pin plate adapter.
6. Lower vehicle onto universal adapter base while guiding pins into jack holes.
(Rev. 9/98)
3