Baumer MTRM 16G2524/M250 User Manual
Page 2
2/2
Montage
Mounting
Assemblage
Ausgangssignale
Output sequences
Sequence de sortie
pin hole
channel 2
channel 1
CW
modul
Axial tolerance ±1 mm
working distance
gear width
Ø
26
H
7
Bohrbild
Drill pattern
Gabarit de perçage
recommended screw:
M8 x 20
O-ring HNBR 70 Shore A ø 22 x 2,5
Kabel: Für geschützte, permanente Verlegung in Geräten, Kabelkanäle etc. Min. Biegeradius 16 mm
Cable: For protected, permanent cable routing in appliances, cable conduits etc. Minimum bending radius 16 mm
Câble: Pour le passage en chemins de câbles, conduits de câbles, etc. Le diamètre de courbure minimal du
câble est 16mm.
channel A
channel B
Drehrichtung im Uhrzeigersinn / Clockwise
rotation / Sens de rotation horaire
Accessories
Accessoires
Zubehör
Allgemeine Hinweise
General informations
Informations générales
Fulfilled standards:
EN 50155:2007 (class S1)
EN 50121-3-2:2006 7.1, 7.2¹, 7.3 1¹, 8.1, 8.2, 9.1, 9.2, 9.3
EN 61373:1999 (category 3)
¹) only with external CE-compliant power unit conform
to EN 61000-6-2:2005