CREATIVE Network Blaster Wireless Access Point Router CW2202 - Manual (Page 30)

Configuring Basic Settings 4-12
Configuring
Wireless LAN
settings The Wireless LAN page is where you configure the wireless LAN settings of your
Wireless AP Router. Refer to Figure 4-6 to learn more about configuring these
settings.
Although not essential
to operation, configure
your Wireless LAN
settings after setting
up your Wireless AP
Router to avoid conflict
with other wireless APs
in the vincinity.
Figure 4-6
Click this link to view
this page.
Broadcast SSID
If you enable this, your Wireless
AP Router will broadcast its SSID
to all wireless clients in the vicinity.
Disable this if you want your
Wireless AP Router’s SSID to be
invisible to wireless clients.
Channel ID
To avoid interference with
other Wireless AP Routers,
select a channel ID that is
different from other Wireless
AP Routers in the vicinity.
Wireless SSID
A name that identifies a wireless
LAN. It is recommended that you
change your Wireless AP Router’s
SSID so that your wireless LAN can
easily be distinguished from others
in the vincinity. All wireless clients
communicating with your Wireless
AP Router must have the same
SSID as your Wireless AP Router.