LaView HDS Series User Manual
Page 2
HDMI
Ethernet
Power Cord
1. Connecting The Basics
Unbox the HDS cameras and the pre-made
BNC coaxial cables
4. Connecting the HDS Camera
Connect the cameras like the image below
5. Turn the Power ON
Please Contact our Technical Support
Pre-Made Cable
Spliter
Camera
Power Supply
2. Connection Sample
HDMI
Ethernet
Mouse
Power Cord
3. Connecting the HDS Cameras
Congratulations!
If you’re still having difficulty with this unit,
please contact customer support at:
626-898-4988
When you have finished connecting all cables to
the DVR, Turn ON the power switch on the rear
of DVR.
Your set up wizard will appear on your monitor.
Simply follow its steps to configure.
By right clicking the mouse, you will see your
menu bar.
Main Menu Login: Admin
Password: 12345
Your System is Now Ready to View
www.laviewsecurity.com
Take the power cord, HDMI cable
(not included)
Ethernet cable, mouse and connect them to
the back of the LaView DVR System
Back of DVR
Mouse
www.LaViewsecurity.com