Lexar Image Rescue 2.0 - Manual (Page 8)

FORMAT CARD
If you experience a card error message on your camera, reformatting the card
with Image Rescue can usually fix it. Also the Format Card command can
reliably format cards larger than 2GB to the original FAT32 specification (for
more information on this visit www.lexarmedia.com/fat32).
To format your card:
• Click on the FORMAT CARD icon, then the FORMAT CARD button
• NOTE: If you need to remove your card after the process has started, make
sure to use the CANCEL button first to avoid any damage to your card.
• NOTE: For JumpShot users, you will need to remove and reinsert your card
after the formatting is complete.
7