Child lock controls, Cycle chart, Operating instructions – FRIGIDAIRE FGBD2438PF User Manual
Page 6
6
OPERATING INSTRUCTIONS
Select HEAVY WASH and
desired OPTIONS.
HI-TEMP WASH and
SANITIZE will automatically
be provided.
4 washes
4 rinses
2 1/4
For pots, pans, casseroles and
dinnerware with
dried-on or baked-on soils.
Cycle Chart
Soil Level
Time*
(Hours)
Washes/
Rinses
Water
(approx.)
To Select Cycle
Cycle
Heavy Wash
Heavy and
Medium
2
2 washes
4 rinses
Select NORMAL WASH and
desired OPTIONS. Selecting
HI-TEMP ON or SANITIZE will
result in a Longer cycle.
4 washes
2 rinses
2
For regularly soiled dishes
and silverware.
Normal Wash
Heavy
gal.
imp. gal.
liters
9
8
34
gal.
imp. gal.
liters
7
6
25
gal.
imp. gal.
liters
7
6
26
Medium
Select TOP RACK and desired
OPTIONS.
2 wash
1 rinse
1 1/4
For lightly soiled or pre-rinsed
dishes and silverware when you
do not have a full load.
Top Rack
Select RINSE ONLY.
DO NOT USE detergent.
2 rinses
1/4
For rinsing dishes that will be
washed later.
Rinse Only
6
5
22
gal.
imp. gal.
liters
2
3 washes
2 rinses
gal.
imp. gal.
liters
4
3
14
gal.
imp. gal.
liters
2
2
9
Light
Light
5
4
17
gal.
imp. gal.
liters
1 3/4
2 washes
2 rinses
washing
drying
clean
sanitized
1-24 hrs
sanitize
delay
start
hi temp
wash
heavy
wash
light
wash
top
rack
rinse
only
normal
wash
air
dry
START
cancel
add rinse aid
hold to lock
Extra
Light
4
3
13
gal.
imp. gal.
liters
1 1/2
2 washes
1 rinse
* Includes dry time
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock the
dishwasher controls by pressing and releasing the AIR
DRY pad for 8 seconds while the door is latched. An
indicator light on the lock graphic pad will illuminate when
the controls are locked and no new selections can be
made until the lock is released. To unlock the controls,
press the same pad AIR DRY, until the indicator light goes
out.
Not all cycles available on all models.
The time remaining could suddenly increase or drop
several minutes. This means the Smart Sensor has
checked the soil level and has determined that additional
water fills are needed or that water fills can be deleted.
NOTE
Light
All
The DishSense
TM
Technology checks the soil level on your dishes in the Heavy Wash, Normal Wash and Top Rack cycles.
Depending on soil level, the sensor will determine if additional water fills are needed to clean the dishes or if water fills
can be deleted. Cycle time and water usage will vary based on the amount of soil on the dishes. Cycle time will also vary
based on the options selected and the incoming water temperature.