Side-by-side refrigerators, Built-in look”cutout dimensions – FRIGIDAIRE FFSS2314QP User Manual
Page 3
Specifications
subject to change.
USA
•
10200 David Taylor Drive
•
Charlotte, NC 28262
•
1-800-FRIGIDAIRE
•
frigidaire.com
CANADA
•
5855 Terry Fox Way
•
Mississauga, ON L5V 3E4
•
1-800-265-8352
•
frigidaire.ca
Side-by-Side Refrigerators
FFSS2314Q 10/14
© 2014 Electrolux Home Products, Inc.
Side-by-Side Refrigerator Specifications
•
Product Shipping Weight (approx.) – 270 Lbs.
•
Voltage Rating – 120V / 60 Hz / 15 Amps
•
Connected Load (kW Rating) @ 120 Volts = 1.02 kW
(For use on adequately wired 120V, dedicated circuit having 2-wire
service with a separate ground wire. Appliance must be grounded
for safe operation.)
•
Amps @ 120 Volts = 8.5 Amps
•
Always consult local and national electric & plumbing codes.
•
Floor should be level surface of hard material, capable of supporting
fully loaded refrigerator.
•
When installing refrigerator adjacent to wall, cabinet or other appliance
that extends beyond front edge of unit, 20" minimum clearance
recommended to allow for optimum 120° to 180° door swing, providing
complete drawer / crisper access and removal. (Absolute 4-1/2"
minimum clearance will ONLY allow for 90° door swing which will
provide drawer / crisper access with restricted removal.)
•
To ensure optimum performance, avoid installing in direct sunlight or
close proximity to range, dishwasher or other heat source.
•
For proper ventilation, front grille MUST remain unobstructed.
•
Recess electrical outlet when possible.
•
Water recess on rear wall recommended to prevent water line damage.
•
Water Pressure – Cold water line must provide between 30 and 100
pounds per square inch (psi).
•
Copper tubing with 1/4" O.D. recommended for water supply line
with length equal to distance from rear of unit to household water
supply line plus 7 additional feet. Optional Water Supply Installation
Kits available.
“Built-In Look” Specifications
•
Minimum opening of 70-1/4" H x 33" W x 28-7/8" D required to allow
for ease of installation, proper air circulation, and plumbing / electrical
connections.
•
Remove all wall / floor molding prior to installation.
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
FFSS2314Q S / P /E
23 Cu. Ft. Standard-Depth
“Built-In Look”Cutout
Dimensions
(A) 70
1
/
4
" (B) 33" (C) 28
7
/
8
"
B
C
A
23 Cu. Ft. Standard-Depth Refrigerator - FFSS2314Q
Baseline (Hidden Hinges)
5"
28
3
/
4
"
69
5
/
8
"
with
3
/
8
"
rollers
68
7
/
8
"
with
3
/
8
"
rollers
Power
cord
location
(right
bottom
rear)
Water
line inlet
location
(left
bottom
rear)
34
1
/
2
"
Allow 48" min. (with
doors 90° open)
33"
Doors
32
5
/
8
"
Cabinet
31
3
/
4
"
Top View
24"
Cabinet
28
7
/
8
" Side Panels,
1
/
2
" min. width
25"
Countertop
Allow 1" min. clearance at rear
for proper air circulation and
water / electrical connections
Recessed
water line
Recessed
electrical outlet