FRIGIDAIRE FFLG2022MW - Manual (Page 18)

18
Connecting venting
1 Remove the two screws (items A, to the right)
securing the dryer front access panel to the
dryer cabinet. Lift the panel until the tabs can be
disengaged from the cabinet, remove the panel and
set aside.
2 Connect the exhaust duct to the outside exhaust
system. Use of a 4” (10.2 cm) clamp (item B, to the
right) is recommended to connect the dryer to the
exhaust vent system. Use metal foil tape to seal all
other joints.
3 Reinstall the dryer front access panel.
4 Carefully slide the laundry center to its fi nal
position. Recheck for level and rock corners for
stability.
B
A
A
INSTALLATION INSTRUCTIONS