FRIGIDAIRE FFGS3025LS - Manual (Page 2)

2
30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
(Models with Sealed Top Burners)
1 1/8"
(2.86 cm)
FRONT
OF
CABINET
F
Ref.
22 7/8" (58.1 cm) min.
23 1/4" (59.05 cm) max.
(see Note 4)
NOTE:
1. Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2. Do not seal the range to the side cabinets.
*IMPORTANT: To avoid cooktop cooktop (or glass) breakage for cutout width (E
dimension) of more than 30 1 /
16
" (76.4 cm), make sure the appliance is centered in the
counter opening while pushing into it. Raise leveling legs at maximum position, insert
the appliance in the counter and then level.
Make sure the unit is supported by
the leveling legs not by the cooktop (or glass) itself.
21¾”
(55.25 cm)
D
C
A
B
Door Open
(see note 5)
Side panel
Figure 1
3. 24" (61 cm) minimum clearance
between the cooktop and the bottom
of the cabinet when the bottom of
wood or metal cabinet is protected
by not less than ¼" (0.64 cm) flame
retardant millboard covered with not
less than No. 28 MSG sheet metal,
0.015"(0.4 mm) stainless steel,
0.024"(0.6 mm) aluminum, or 0.020"
(0.5 mm) copper.
30" (76.2 cm) minimum
clearance when the cabinet is
unprotected.
4. For cutouts below 22 7/8"(58.1
cm), appliance will slightly show
out of the cabinet.
5. Allow at least 19 ¼" (48.9 cm)
clearance for door depth when
it is open.
A. HEIGHT B. WIDTH C. COOKTOP
WIDTH
D. DEPTH TO
FRONT OF RANGE
E. CUTOUT WIDTH*
(Countertop and Cabinet)
F. CUTOUT
DEPTH
G. HEIGHT
OF COUNTERTOP
35 5/8" (90.5 cm) -
36 5/8" (93cm)
30" (76,2 cm) 31½" (80 cm) 28 5/16" (71,9 cm) 30±1/16" (76,2±0,15 cm) 21 3/4" (55,2 cm) Min.
22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
36 5/8" (93 cm) Max.
35 7/8" (91.1 cm) Min.