Ice maker information, Ice maker specifications, Ice maker connector plug connections – FRIGIDAIRE FPHS2399PF User Manual

Page 2

Advertising
background image

242288401

ICE MAKER INFORMATION

Test Cycling

Press the momentary contact on the ON/OFF switch for approximately 15 seconds. Ice maker
will continue to complete the cycle.

Water Fill Volume

The water fill can be adjusted without removing the ice maker cover. To adjust the fill size,
remove the small round plug next to the On/Off Switch. Insert a #2 Phillips screwdriver into
the hole about an inch or until it engages the Water Fill Adjustment Screw. Turn the screw
clockwise to reduce the fill size; turn the screw counterclockwise to increase the fill size. One
turn equals approx 20cc (0.68 oz). The correct fill is 85 to 95cc (2.75 to 3.25 oz). When a
water valve is replaced, check the fill volume.

TU

R

N

Mounting
Plate
Screws

Mounting

Plate

Screw

Motor
Gear

Timing

Gear

Water Fill
Adjustment

Ice Maker
ON/OFF
Switch

ICE MAKER SPECIFICATIONS

Electrical

115 vac (127 vac max)

Thermostat

Opens at 48° F ( 9° C), Closes at 9° F ( -13° C)

Heater Wattage

112 watts

ICE MAKER CONNECTOR PLUG CONNECTIONS

Wire Number

Wire Color

Connects to:

1

Green/Yellow

Ground

2

Yellow

Water Valve

3

Black

Line

4

Light Blue

Neutral

Advertising