Casio HA-A34AT - Manual (Page 12)

1
While placing the Cradle-Type Battery Charger on its side as shown in the illustration, grab
onto the circled portion and apply force in the direction of the arrow to remove, and then affix
the seal included with the Cradle-Type Battery Charger to the location where the Fall
Protector is installed.
2
Remove the desktop unit by removing the bottom screws as shown in the illustration, and then
fasten the Battery Charger Car Mount Unit with the Battery Charger Car Mount Unit
mounting screws.
3
Attach the brackets with the bracket screws as shown in the illustration as necessary.
Installing the Battery Charger Car Mount Unit
Screws
Inner side holes
Inner side holes
04.4.21, 5:13 PM Page 12