Clarion WH 105 - Manual (Page 7)

5
Battery Installation
1. Open the battery compartment by sliding the
cover towards the bottom of the Headphone.
2. Place two (2) alkaline AAA batteries into the
battery compartment of the Headphone(s),
making sure that the battery polarity is correct.
3. Snap the battery cover back into place.
Operation Description
PLEASE READ CAREFULLY TO PREVENT
DAMAGE TO THE HEADPHONES OR YOUR EARS.
1. Be sure batteries are properly installed in the
Headphones.
2. Turn the Headphone volume nearly off before
turning on the power switch.
3. Turn the Headphone power switch to the ON
position.
4. Adjust the Headphone volume to a comfortable
listening level.
(You can adjust the audio source volume louder if
needed).
FinalManual.qxd 2/1/01 9:49 AM Page 5