FRIGIDAIRE FRS12PYS1 - Manual (Page 16)

SLEEP mode(Only for >12000 Btu's)
Press the sleep button to activate the
button again.
Set
temperature
SLEEP FUNCTION (Cooling mode)
1 hour 1 hour
SLEEP FUNCTION (Heating mode)
7 hours
Set
temperature
TIMER Operation
TIMER button can set the auto-on time of the unit.
To set the starting time
1.
2.
Press the "TIMER ON" button to activate the auto start timer function .
Auto start can be set from 0~24 hours. After pressing "TIMER ON" button,
"ON" on the display will blink, and
during 5 seconds blinking ,the value can be
adjusted by pressing or "+" "-" button. Every press of this button,1 minute will be
2 seconds later
the value will be increased or decreased automalically ,and after 10 minutes
increase or decreased, the value will be changed 10 minutes every 0.5 second;
Press the "TIMER ON" button to conform the time.
when repressing the "TIMER ON" button , the "TIMER ON" setting will be
canceled.
How the air conditioner works
sleep mode. To deactivate, press the
‡7KHIDQVSHHGZLOOEHDXWRPDWLFDOO\
FRQWUROOHG
‡7KHIDQVSHHGZLOOEHDXWRPDWLFDOO\
FRQWUROOHG
‡7KHDLUFRQGLWLRQHUZLOODXWRPDWLFDOO\
GHFUHDVH SHUKRXULQDKRXUSHULRG
7KHVHWWHPSHUDWXUHZLOOEHVWHDG\IRU
WKHQH[WKRXUVWKHQWKLVPRGHZLOO
EHWHUPLQDWHG
In heating mode (only for models with
heating function):
In cooling mode:
‡7KHDLUFRQGLWLRQHUZLOODXWRPDWLFDOO\
LQFUHDVH SHUKRXULQDKRXUSHULRG
7KHVHWWHPSHUDWXUHZLOOEHVWHDG\IRU
WKHQH[WKRXUVWKHQWKLVPRGHZLOO
EHWHUPLQDWHG
2 °F
2 °F
1 hour 1 hour
2 °F
2 °F
7 hours
36
increased or decreased,but press the or button, continuously "+" "-"
̧
̧