FRIGIDAIRE FFET2725PS - Manual (Page 16)

16
OVEN CONTROLS
Setting Self Clean Cycle Duration
The clean key controls the self cleaning feature. If you are
planning to use the oven directly after a self clean cycle
remember to allow time for the oven to cool down and the
oven door to unlock. This normally takes about one hour. A
3 hour self clean cycle will actually take about 4 hours to
complete.
To set the controls for a 3 hour Self Cleaning cycle to
start immediately and shut off automatically
1. Be sure that the clock is set with the correct time of day
and the oven door is closed.
2. Press clean. 3:00, CLn will appear, UPPER and
CLEAN will flash in the display. The control will auto-
matically clean for a 3 hour period.
3. Press start. DOOR and LOCKED will flash; UPPER
and CLn will appear in the display and the clock will
return to the time of day.
4. As soon as the control is set, the motor driven oven
door lock will begin to close automatically. Once the
door has been locked the UPPER, DOOR and
LOCKED indicator light will stop flashing and remain
on. Also, the oven icon will appear in the display. Allow
about 15 seconds for the oven door lock to close.
5. Press start time. UPPER and DELAY will start flashing
and - - - - will appear in the display.
Note: If the optional delay self clean is desired, finish
steps 6-8.
1. Press the up or down arrow until the desired start time
appears in the display.
2. Press start or wait 5 seconds. The display will return
to the time of day.
3. The control will start the self cleaning at the set start
time, for the period of time previously selected.
When the Self Clean Cycle is Completed
1. Three long beeps will be heard and CLn will disappear
from the display. UPPER, DOOR and LOCKED will
remain in the display until the door is unlocked. Some
models will display Hot. The cooling fan will continue to
run until the oven has cooled down.
2. Once the oven has cooled down for 1 hour, and
UPPER, DOOR and LOCKED are no longer displayed,
the oven door can then be opened.
Stopping or interrupting a Self Clean Cycle
If it becomes necessary to stop or interrupt a self
cleaning cycle due to excessive smoke or fire in the
oven:
Press clear off.
Once the oven has cooled down for approximately 1 hour
and UPPER, DOOR and LOCKED are no longer displayed,
the oven door can then be opened.
Important Notes when using the self clean feature:
• A self clean cycle cannot be started if the Oven Lockout
feature is active.
• When self clean cycle is active on one oven, the other
one cannot be used or set for a self clean cycle or any
cooking cycle.
• If your clock is set for normal 12 hour display mode the
delay self clean can never be set to start more than 12
hours in advance. To set for a delayed self cleaning
cycle 12-24 hours in advance see instructions to set
control for the 24 hour time of day display mode.