Manual operation, Adding cook time (+30sec), Setting defrost by weight – FRIGIDAIRE FFCE2238LB User Manual

Page 11: Heating with multiple cooking stages, Setting defrost by time

Advertising
background image

11

Manual Operation

Adding cook time (+30sec)

1. Press Defrost pad

2. Press 1.

3. Use the number pads to enter desired

defrost time (defrost time may be set up to

99 minutes and 99 seconds).

4. Press START/+30sec pad.

When defrost has finished, you will hear a series of beeps.

Setting Defrost by Weight

1. Press Defrost pad
2. Press 2.
3. Use the number pads to enter weight of

food to defrost in pounds. You may enter

weight from 0.5 to 6.5 pounds.

4. Press START/+30sec pad.

When defrosting has finished, you will hear a series of

beeps. The oven beeps during the defrosting cycle to

NOTE:

The weight amount must be a valid entry for this

feature to start. A valid weight entry is 0.5 to 6.5 pounds A

decimal point is assumed before the last digit you enter.

For example, enter 5 for 0.5 pounds and enter 50 for 5.0

pounds.

Heating with multiple cooking stages

Example: to cook food at 80%power for 3 minutes and
then 50% power for 6 minutes 30 seconds:

For best results, some microwave recipes call for different

power levels or different lengths of time for cooking. Your

microwave may be set to change from one stage to another

automatically (2 stages maximum).

1. Press Power Level pad.

2. Use the number pads to enter power level

for the 1st stage.

(80% power).

3. Press START/+30 sec pad.

4. Use the number pads to enter heating

time for the 1st stage (cook time may be

set up to 99 minutes and 99 seconds).

5. Press Power Level for the 2nd stage.

6. Use the number pads to enter power level

for the 2nd stage. (50% power)

7. Press START/+30 sec pad.

8. Use the number pads to enter heating

time for the 2nd stage (cook time may be

set up to 99 minutes and 99 seconds).

9. Press START/+30 sec pad.

When finished, you will hear a series of beeps.

NOTE:

1. The “Convenience operation” and “Sensor operation”

can not be set as one of multiple cooking.

2. If the 1st stage is the set defrost feature, the 2nd stage

can’t be set to Defrost again. If one of the stages is

weight defrost, that will be the 1st stage when cooking

starts.

POWER

LEVEL

POWER

LEVEL

1. Press START/+30sec pad 2 times.

NOTE:

The “+30sec” function is not available when using

the “weight defrost” or any of the “convenience
operation

” and “sensor operation” features.

Pressing the START/+30sec pad once starts 30 seconds of

cooking at a 100% power level.
Pressing the START/+30sec pad during cooking adds 30

seconds (for each press) to the cook time.

Example: to add 1 minute of cook time.

Example: to defrost 0.5 lbs. of food using the automatic
defrost cycle (cook time determined automatically)

Setting Defrost by Time

Example: to defrost food with the automatic defrost
cycle for 5 minutes:

signal that the food needs to be turned or rearranged.

The oven beeps during the defrosting cycle to signal

that the food needs to be turned or rearranged.

Advertising
This manual is related to the following products: