FRIGIDAIRE FGDS3065PF - Manual (Page 17)

17
BEFORE SETTING OVEN CONTROLS
Effortless™ Oven Rack system
Some models are equipped with a special oven rack
system that automatically extends the oven rack to assist in
access to your food items. This rack extends when the oven
door is opened or closed.
To assemble the Effortless™ Oven Rack system:
1. Locate all required parts. You will need the supplied
oven rack. Effortless™ Oven Rack is a flat rack with a
special dark coating on the left and right rack sides and
the two supplied chrome connector arms.
2. Be sure the oven is completely cool before proceeding.
Open the oven door.
3. Place the oven rack in positions 1,2, or 3 (see Figure 16
to verify positions)..
Be sure the rack connector brackets are at the rear of the
range and pointing towards oven bottom. (See
Figure 17 )
4. Assemble one connector arm at a time. With the oven
door open and the oven rack in place, install one end of
the connector arm to the hole in the door connector
bracket (
Figure 18 ) and the other end in the hole in the
rack connector bracket ( Figure 18 ). The oven rack may
need to be adjusted in or out in the rack position to
match the length of the connector arm.
Only the Effortless™ Oven Rack system performs best
when connected and used in oven rack position 2.
If the rack system is assembled with the connector arms,
the Effortless™ Oven rack may be used in oven rack
positions 1, 2, and 3.
Figure 16: Rack positions
IMPORTANT
1
2
3
5
4
Figure 17: Bracket must be at rear of the range
Figure 18: Assembly of the Effortless™ oven rack
rack connector
bracket
oven
rack
connector
arm
open oven
door
connector
arm