Features at a glance, Operating instructions, Features may vary according to model – FRIGIDAIRE FGID2466QB User Manual

Page 4: Wash cycle selections, Option selections, Hi-temp wash option

Advertising
background image

4

FEATURES AT A GLANCE

Features may vary according to model

Heating Element

Glass Trap

Detergent

Dispenser

Overfi ll Protector

Silverware Basket

Lower Rack

Serial Label
(Located on Right)

Top Rack

Nozzle or Spray Arm

(located inside the unit)

Cup Shelves

Middle Spray Arm

Lower Spray Arm

Rinse Aid

Your dishwasher cleans by spraying a mixture of hot water and detergent through the spray arms

against soiled surfaces. First, the dishwasher fi lls with water covering the fi lter area. Water is

then pumped through the spray arms. Soil particles go across the fi lter and down the drain as the

water is pumped out. This series of steps are repeated as needed. The number of water fi lls vary

with the cycle being used.

Bowl Tines

Wash Cycle Selections

Cycle times are approximate and will vary with

Cycle times are approximate and will vary with

options selected. Hot water is necessary to

options selected. Hot water is necessary to

activate dishwasher detergent and melt fatty

activate dishwasher detergent and melt fatty

food soils. An automatic sensor will check the

food soils. An automatic sensor will check the

incoming water temperature and, if it is not

incoming water temperature and, if it is not

hot enough, the cycle will be lengthened for

hot enough, the cycle will be lengthened for

automatic water heating in the main wash and

automatic water heating in the main wash and

fi nal rinse of all cycles. This happens even

fi nal rinse of all cycles. This happens even

when HI-TEMP WASH option has not been

when HI-TEMP WASH option has not been

selected. When HI-TEMP WASH is selected,

selected. When HI-TEMP WASH is selected,

an even higher temperature will be reached to

an even higher temperature will be reached to

handle heavier soil loads.

handle heavier soil loads.

OPERATING INSTRUCTIONS

Option Selections

(available on

select Models)

Hi-Temp Wash Option

When HI-TEMP WASH option is selected, the

When HI-TEMP WASH option is selected, the

dishwasher heats water in the main wash to

dishwasher heats water in the main wash to

approximately 140

approximately 140

oo

F (60

F (60

oo

C).

C).

This increase in water temperature helps the

This increase in water temperature helps the

dishwasher detergent remove food grease

dishwasher detergent remove food grease

and soil from dishes more effectively and aids

and soil from dishes more effectively and aids

in drying. HI-TEMP WASH option is available

in drying. HI-TEMP WASH option is available

on POWER PLUS, NORMAL WASH and TOP

on POWER PLUS, NORMAL WASH and TOP

RACK cycles. HI-TEMP WASH is automatically

RACK cycles. HI-TEMP WASH is automatically

provided when the POWER PLUS cycle is

provided when the POWER PLUS cycle is

selected.

selected.
When HI-TEMP WASH option is selected, the

When HI-TEMP WASH option is selected, the

indicator light will come on and remain on until

indicator light will come on and remain on until

end of cycle. To turn off the HI-TEMP WASH

end of cycle. To turn off the HI-TEMP WASH

option, press HI-TEMP WASH a second time.

option, press HI-TEMP WASH a second time.

The indicator light will turn off.

The indicator light will turn off.

NOTE

Lights on the console will turn off once

Lights on the console will turn off once

the door is shut and wash cycle begins. If

the door is shut and wash cycle begins. If

preferred to have lights remain on see

preferred to have lights remain on see

Console Lights section for instructions.

Console Lights section for instructions.

Н

Advertising
This manual is related to the following products: