Operating instructions, Removing collected water – FRIGIDAIRE FAD954DWD User Manual

Page 8

Advertising
background image

Operating Instructions

8

2009 Electrolux Home Products, Inc.

All rights reserved.

2. Continuous Drainage:

Removing Collected Water

(continued)

fig. 2

fig. 3

fig. 1

1. Check the seal between the hose and the drainage joint. If there is a small leak then replace the hose gasket and re-tighten
the hose.
2. It is recommended that a Dehumidifier Drain Hose - 11/16" (17.5 mm) or larger be used.

NOTE:

fig. 7

fig. 4

fig. 5

fig. 6

a. Open the drain cover at the back of the unit and take out the drainage joint from the accessory package. (fig.1)
b. Srew the drainage joint onto the threaded portion of the drainage connector of the unit securely. (fig.2&3)
c. Srew the garden hose onto the threaded portion of the drainage joint. (fig.4)

d. Make sure the hose is secure so there are no leaks.
e. Direct the hose toward the drain, making sure that there are no kinks that will stop the water flowing. (fig.5)

3. When applying continuous drainage option, place dehumidifier on a horizontal surface and make sure garden

hose is clear of any obstructions and directed downward. Improper installation or use of hose may result in
water filling up the bucket and causing the unit to shut off. Empty water bucket if shut-off occurs, then check
dehumidifier location and hose for proper installation. (fig.7)

f. When you want to remove the garden hose, prepare a drip tray (not supplied) to collect the water from

the nozzle.(fig.6)

Advertising