FRIGIDAIRE FFMV154CLS - Manual (Page 29)

CLEANING AND CARE
Disconne ct t he pow er cord before cleaning or
leave t he door op en t o deact ivat e t he oven during cleaning.
Wipe with a damp cloth. Dry thoroughly. Do not use cleaning
sprays, large amounts of soap and water, abrasives or sharp
objects on the panel—they can damage it. Some paper towels
can also scratch the control panel.
It is important to keep the area clean where the door seals
against the microwave. Use only mild, non-abrasive
detergents applied with a clean sponge or soft cloth. Rinse well.
If the cord becomes soiled, unplug and wash with a damp cloth.
For stubborn spots, sudsy water may be used, but be certain
to rinse with a damp cloth and dry thoroughly before plugging
cord into outlet.
To clean stainless steel surfaces, use a hot, damp cloth
with a mild detergent suitable for stainless steel surfaces.
Use a clean, hot,damp cloth to remove soap. Dry with a
dry, clean cloth.
If food soil remains, try a general kitchen cleaner, such as
Fantastik ® , Simple Green ® or Formula 409 ® .
For hard-to-clean soil, use a standard stainless-steel
cleaner, such as Bon-Ami
® or Cameo ® .
Apply cleaner with a damp sponge. Use a clean, hot,
damp cloth to remove cleaner. Dry with a dry, clean cloth.
Always scrub lightly in the direction of the grain.
After cleaning, use a stainless-steel polish, such as
tainless Steel Magic ® , Revere Copper and Stainless Steel
Cleaner ® or Wenol All Purpose Metal Polish ® . Follow the
product instructions for cleaning the stainless-steel surface.
29
Control Panel and Door
Door Surface
Power Cord
Stainless Steel
Do not use a steel-wool pad;it will scratch the surface.