AAXA Technologies LED Android - Manual (Page 9)

Getting Started
4
Chapter 2
1. Connect the power cord to the Projector
2. Connect the opposite end of the power cord into a wall outlet.
3. Press the POWER button on the top of the projector to start the projector or press
the POWER button on the remote control to start the projector.
Powering ON the projector
Powering OFF the projector
* The POWER button’s blue LED light will turn on when the projector is on.
1. Press the button on the keypad or remote twice to turn the projector off. The optical
engine should power off and the fan should stop spinning. The projector can be
turned on using the remote control.
Power Socket