AAXA Technologies M1 Limited - Manual (Page 10)

To connect an A/V cable insert the 3.5mm portion into the A/V port of the projec-
tor. Then click on either the “A/V input” icon in the main menu, or press “source” on
the remote control and select “A/V input”. A blue screen will appear and the
Projector will be ready to accept an A/V signal.
Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune
(optional), Playstation Portable (optional), and others. Please check
www.aaxatech.com or your AAXA dealer for optional A/V cables.
Accessing the onboard memory
The M1 projector includes 1GB of onboard memory for storage.
To access this memory connect a USB cable to the back of the
projector and a computer. Then select the “USB Data” function
in the main menu.
The computer should auto-detect the connected projector and its onboard
memory as a “flash drive.” Double-click the drive to open the drive contents and
manipulate as a standard USB flash drive.
NOTE: If the computer fails to detect the flash drive, check to make sure the projec-
tor is in USB-Data mode and do a search for new devices. If still unable to find the
drive, please consult with your operating system’s owner manual regarding
detecting flash drives.
General Operation
09