Abbingdon Music Research CD-777 Premier Class - Manual (Page 24)

24
As transport, the
CD-777 runs
jitterless
4.2 Transport Output (RCD-777 only)
The CD-777 with its S/P-DIF connections may be used as a transport (via the output) or as a standalone DAC (via
the input).
With the CD-777 in Standby mode, connect the desired interconnect cable from the S/P-DIF output of the CD-777
to the desired external DAC. Then power on and press the DAC button (RC4) to select:
SOURCE
Activate the CD-777 before powering up the external DAC to ensure the signal is detected. You are now ready to
commence CD playback using the CD-777 as a dedicated transport.