Abbingdon Music Research AM-777 Premier Class User Manual
Page 20
20
4.4 Setting Fixed Input Level for Bypass Mode
When using the AM-777 as part of a home theatre system with an external processor controlling the overall system
volume, it is possible to program one of the five input sources to have a fixed level of input such as for a home
theatre system of either 0.775V (0dbu) or 1.55V (+6dBu). This allows the 2-Channel music system to be seamless-
ly integrated into a high-performance multi-channel home cinema system.
- Go to Section 4.1 and follow the instructions to select the last label:
H
o
m
e
T
h
e
a
t
r
e
D
i
r
e
c
t
• Simultaneously press ‘+’ volume (F3) on the front panel of the AM-777 and ‘OK’ (RC7) on the RCD-77
• Press the Volume+ button untill the display reads +12dB, press Volume+ again
• Press the OK button to enter the (Volume Control) Bypass mode
• Confirm the warning message by pressing Volume+ or press OK to exit without enabling Bypass mode
• Then select one of the following settings using Volume+/Volume - :
HTD mode: always
use an external
pre-amp as this
mode will switch
the AM-77 to full
volume!