Troubleshooting – Abbingdon Music Research LS-77 Reference Class User Manual
Page 13
13
Troubleshooting
Symptom
Possible cause
Solution
No sound
• incorrect audio cable connections
• connect the cables correctly
• incorrect amplifier operation
• make sure that the input selector on
the amplifier is set to the desired source
Sound with no bass
• check speaker connectors are not
• check polarity using the AMR test CD and
and generally strange
connected with wrong polarity
correct if required
Sound is too bright or
• Incorrect placement of speaker
• Place speaker with high frequency driver upright dull
and at ear hight, pointing at the listening position
• Incorrect adjustment of HF Level
• Adjust HF level as per Appendix A
Bass is too full or lean
• Incorrect placement of speaker
• Place speaker correctly
• Incorrect use of port inserts
• Add (if too full bass) or remove (if too lean bass)
port inserts as required
Other problems
• re-trace the procedure or contact your nearest AMR
distributor/dealer