Abu Garcia Max Low Profile Reels - Manual (Page 4)

adjustment star by rotating it clockwise. When the line reaches its breaking point, loosen the
adjustment star ¼ turn.
F. SPOOL TENSION KNOB
The spool tension knob controls how fast the spool spins when casting. It is located on the
sideplate of the reel next to the handle. With the rod-reel-line-lure properly assembled, place the
tip of the thumb on the line to hold the spool. Depress the thumb bar with the pad of your thumb
to disengage the gears. Allow the lure to drop to the ground. If the lure does not fall when the
thumb bar is depressed, turn the spool tension knob counterclockwise (left) to reduce tension on
the spool. If the lure falls to the ground and the spool continues to rotate, spool tension is too
loose. Rotate the knob clockwise (right) to increase tension. Additional casting brakes, if
applicable, are designed for fine tune adjustment.
It is normal to experience backlashes when learning how to cast a low profile reel. In the event
that you are just learning how to cast, tighten the spool tension knob an extra ¼ to ½ a turn and
slowly back it off as you learn to cast.
G. REMOVING THE SIDEPLATE
Max™ reels are equipped with a removable palm sideplate that allows access to the spool. To
open the sideplate, turn the spool access thumbscrew counterclockwise until it disengages from
the sideplate. After the thumbscrew has been unscrewed from the sideplate, gently pull on the
thumbscrew head to slide it outward. Twist the sideplate in an upward motion until it reaches the
stop position. The sideplate can now be removed.
H. REEL FUNCTION
How to Adjust the Braking System: Max™ reels feature the adjustable MagTrax™ magnetic
brake system that delivers excellent casting control. For maximum casting distance and minimal
tendency of line over run, it is necessary to adjust the braking system to match the weight of the
lure and angler preference.
- MagTrax™ Brake -