Canon Leather Soft Case 70 - Manual (Page 72)

70
You can check whether the image is in focus right after it is recorded.
To Cancel Checking the Focus
Press the shutter button halfway.
Checking for Focus Right After Shooting
1
Shoot.
zThe recorded image displays for about 2 seconds (or the
interval set with the Review function p. 24).
2
Press (or ) while the
image is displayed.
zThe number of times the DISP. but-
ton is pressed depends upon the
display settings for the LCD monitor
(See below). Press the DISP. button
repeatedly until the screen at the
right appears.
zDisplays as follows.
- Camera is focused: the AF frames are displayed in the
recorded image in white and the frame that is in focus has
an orange frame within it.
- Camera is not focused: an orange frame appears at the
centre of the recorded image.
- Contents of the orange frame can be confirmed at the bot-
tom right. You can change the display magnification of the
area within the orange frame with the zoom lever.
zYou can switch between orange frames and change the dis-
play position (p. 71) using the MENU button or the FUNC./
SET button.
z You can delete an image by pressing the button while
the image is displayed, except in the display position
change mode (See Basic Guide, p. 19).
z Pressing the DISP. button will change the display on the
LCD monitor as follows.
Focus Confirmation
Î Detailed Î No Information
Recorded Image
Orange frame contents