Canon DR-2050SP - Manual (Page 19)

Before Using the Scanner 13
Chapter 1
3. Names and Functions of Parts
This section describes the name and function of each part. Make sure to read
this section and familiarize yourself with the parts of the scanner before using
the scanner. For part names and their functions of the DR-2050SP, see the DR-
2050SP User’s Guide Presentation Mode Edition.
„ Front/Right Side
„ Front (Upper Cover and Document Feed Tray open)
Upper Cover
Open when you need to set a document in the scanner.
Power Indicator
Lights green when
the scanner is turned
ON.
Document Feed
Tray
Open this tray to
place your
documents into the
feeder. (See p. 21.)
Stop Button
Press to cancel
document scanning.
(Feed Mode:
Panel + Auto)
Scan Button
Press to start
document scanning.
Feed Selection Lever
Use it to set the way the documents are fed. To feed a multi-
page document one page at a time, lower the lever (Page
Separation mode). To feed bound documents, such as invoices,
without separating them, raise the lever (Bypass mode).
Feed Indicator
Indicates the Feed
Selection Lever
position.
Document Eject
Opening
Scanned documents
are output to the
document eject
opening.
Feed Extension Plate
Pull out this plate if
documents tend to
fall forward.
OPEN Knob
Use this knob to
open the front unit.
Document Guide Adapter
When documents are
skewed, insert the adapter
into the document guide.
Document Feed Opening
Place the document to be
scanned here.
Document Guide
Adjust them to align with
the width of the document.
Front Unit
Open when
clearing a paper
jam or cleaning
inside.