3 . osd of the channel function, 2 . osd of the audio function – Esselte LCP4210 User Manual
Page 13
3.OSD of the CHANNEL function
MENU INTRODUCTION
Press or button to reach the required setting.
1.Tuner mode：CABLE and ANTENNA.
2.Scan the channels and memorize the channels automatically by /OK button.
Press MENU/EXIT button to stop or it will not stop until the scan is finished.
3.Channel skip:press OK button to enter the submenu.press or button to select
the channel you want to set,and press OK button to set.
10
Video
Audio
Channel
Function
Lock
Channel Skip
Select
Exit
CH+/-
VOL+/-
EXIT
OK
Enter
2 Analog
3 Analog
4 Analog
5 Analog
6 Analog
7 Analog
8 Analog
9 Analog
10 Analog
11 Analog
Video
Audio
Channel
Function
Lock
Channel
Select
Exit
CH+/-
VOL+/-
EXIT
Tuner Anten na
Channel Scan
Channel Skip
OK
Enter
2.OSD of the AUDIO function
MENU INTRODUCTION
Press or button to reach the required setting.
1.Left/Right track balance adjust.Press or to
adjust the audio output between left and right
speakers.
2.Bass adjust.Press or to increase or decrease
the level of the lower-pitched sounds.
3.Treble adjust.Press or to increase or decrease
the level of the higher-pitched sounds.
4.Sound Surround adjust: Select off/on.
5.Sound mode: Press or to select Concert/Living Room /Hall/Bathroom/Cave
/Arena/Church/off.
6.Equaliter adjust:Press or to select off/Rock/POP/Live/Dance/Techno
/Classic/Soft.
7.AVL adjust: Select off/on.
Video
Audio
Channel
Function
Lock
Audio
Select
Exit
CH+/-
VOL+/-
EXIT
Balance 0
Bass 50
Treb le 50
Sound Surrou nd off
Mode off
Equalizer off
AVL off
OK
Enter
Video
Audio
Channel
Function
Lock
Channel
Scan
Cancel
EXIT
Statu s:Scanning... Anten na
Analog Channels:0
Digital Channels:0
63%
Video
Audio
Channel
Function
Lock
Channel
Select
Exit
CH+/-
VOL+/-
EXIT
Tuner Anten na
Channel Scan
Channel Skip
OK
Enter