Casio EXILIM EX-Z1200 - Manual (Page 152)

152
ADVANCED SETTINGS
The on-screen histogram that provides a graphic representation
of the current exposure of the image. You can also display the
histogram in the PLAY mode for information about the exposure
levels of images.
1. Select either a REC mode or the PLAY mode.
You can turn histogram display on or off separately for a
REC and PLAY modes.
2. Press [DISP].
3. On the “Info.” tab, select “+Histogram” and
then press [SET].
NOTE
• You can use key customization to configure the [W] and [X]
buttons so they control the EV shift setting. Then you can
perform EV shift while viewing the results on the on-screen
histogram (page 154).
■
How to Use the Histogram
A histogram is a graph that represents the lightness of an image
in terms of the number of pixels. The vertical axis indicates the
number of pixels, while the horizontal axis indicates lightness. If
the histogram appears too lopsided for some reason, you can
use EV shift to move it left or right in order to achieve better
balance. Optimum exposure can be achieved by EV shifting so
the graph is as close to the center as possible. For snapshots,
you can even display individual histograms for R (red), G
(green), and B (blue). These lines can be used to determine
whether there is too much or too little of each of the color
components in an image.
Using the On-screen Histogram to
Check Exposure
Histogram