Dell PowerEdge C6220 II User Manual
Page 6
Advertising
Getting Started With Your System | 4
1
Push on t he lat ch release buttons on the midpoints of t he end piece t o
open the rail latches. See Figure 1.
2
Align t he end pieces of the rails on the vertical rack flanges to seat
the p egs in the bottom hole of the first U and the top hole of the
second U.
NOTE : The rails can be used in both square-hole (item 1 in the following figure)
and round-hol e racks (item 2 in the following figure).
Fig ure 1. P us hi ng the Latch Rel eas e Butto ns
NOTE : To remove the rails, push on the latch release button on the midpoints
of the end piece and unseat each rail.
Advertising