Configuring the router host name, Configuring network router settings – Motorola WR850GP User Manual
Page 64
Configuration
Section 3
WR850
3-27
Configuring the Router Host Name
This feature allows you to change the Host Name of your router. This feature only applies to
your private home network.
To access the screen, click Networking > DNS Proxy.
Field Description
LAN Private Host
Name
Displays the current Host name for the router. Enter in a new name if
desired.
The default is wr850g (all lower case).
Host Table
Displays the current active Host Name and its associated IP address.
Apply
Click to save your changes.
Cancel
Click to cancel your changes.
Configuring Network Router Settings
From the Networking – Routing screen, you can define up to 20 static routes that specify
the Destination IP, Subnet Mask, Gateway, Interface, and Metric (how many “hops” the
router can make). You can also configure the Network Routing Table here.
RIP (Routing Information Protocol) versions 1 and 2 are routing protocols that are part of
the TCP/IP protocol standard. RIP dynamically determines a route based on the smallest
hop count between source and destination.