Motorola WR850GP - Manual (Page 63)

Section 3 Configuration
3-26 WR850
Field Description
LAN MAC
Address Displays the LAN MAC address of the router. This field cannot be
edited.
LAN Private IP Enables you to create your own private IP network.
Enter an IP address string that you will use for your network.
Because it is a private network, your router gives you the ability to
choose any string you prefer.
The default is 192.168.10.1
LAN Subnet
Mask Enables you to create your own Subnet Mask for your network. The
Subnet Mask determines which portion of a destination LAN IP
address is the network portion and which portion is the host portion.
Enter a Subnet Mask address that you will use for your network.
The default is 255.255.255.0
LAN DHCP
Server Enables or disables the DHCP server. You can only run one DHCP
server on your network. The default is enabled.
Address Pool
Begins Indicates the beginning IP number. Based on the number entered in
the LAN Private IP field. The default is 2.
Address Pool
Size You can reserve up to 253 slots on your DHCP server for potential
clients. For example, when using the router’s default IP of
192.168.10.1, then all numbers up to 192.168.10.254 are available
for use.
If you want to make available every number, enter 253.
The default is 50.
Default Lease
Duration Displays the Hours and Minutes of the default lease duration. To
change, enter a new duration.
The default is 1 day.
Active Leases Displays the current clients that the DHCP server has assigned IP
addresses, including the client’s Computer Name, IP and MAC
address, and the duration of its lease.
Click Refresh to obtain the latest list.
Apply Click to save your settings.
Cancel Click to cancel any changes.