Cooper Lighting AMETRIX ADY071468 User Manual

Visor and non-visor, 1small, outdoor p2r, Installation instructions

Advertising
background image

Set screws

#10-32 x3/8"

(2x)

Wiring the fixture

(8x)

Pan head screws

Canopy

(2x)

Sealing the fixture

#8-32 x3/8"

1/4-20 x2 3/4"

Hex bolt

Attention:

Dual fixture assemblies require additional bracing/structure

around J-box to support fixture.

Pan head screws

#8-32 x3/8"

Hex bolts

(x8)

(x2)

1/4-20 x2 3/4"

Cover plate

1. Slide fixture assembly onto pendant and secure with both 1/4-

20 x.2 3/4" hex bolts.

2. Remove cover plate on bottom of fixture assembly.

3. Attach appropriate wires and ensure all connections are

properly matched.

4. Secure cover plate with eight #8-32 x3/8" pan head screws.

Exploded view and part call-out

1/4-20 x 2 3/4"

Hex bolt

Securing Fixture to Ceiling

fixture

around J-box to support

(by others)

J-box

Set Screw

(2X)

(2X)

#10-32 x3/8"

Canopy

Use additional bracing

1/4" fasteners

(by others)

(4X)

1. Remove both 1/4-20 x 2 3/4" hex bolts from bottom of

pendant.

2. Remove both #10-32 x 3/8" set screws and allow canopy to

slide down pendant.
3. Run wires from J-box into pendant, ensure there is enough

wire to reach cover plate on bottom of fixture assembly.

4. Using appropriate fasteners, secure fixture to ceiling. Use

additional bracing around J-box to support fixture.
5. Replace canopy and secure using both set screws.

3

Warning

2

that all sources of power are turned off. All

Sheet 1 of 2

performed by a certified electrician.

Visor and Non-Visor

: Before starting any work ensure

work must meet local/national codes and be

Do not

mount fixtures vertically.

Installation Instructions

Vault

C-Scroll

Roundel

These installation instructions are valid with the above Ametrix styles.

1

Small, OUTDOOR

P2R

(Pendant, 2-way, Remote ballast)

ADY071468 REV B(ECN80481)

Socket cap screw

(2x)

Socket cap screw

#6-32 x1/2"

#6-32 x5/8"

1. To seal fixture, ensure door is secured with provided socket

cap screws. Secure #6-32 x1/2" socket cap screws above door
latches.

2. Secure #6-32 x5/8" socket cap screw into center of door.

3. Refer to supplementary sheets for torque specs and aiming

instructions.

Advertising