Cuisinart SMO-56 - Manual (Page 2)

2
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic safety precautions should always
be followed, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING.
2. To protect against the risk of electrical shock, do not put motor base of
blender in water or other liquid.
3. Close supervision is necessary when any appliance is used by or
near children.
4. Unplug from outlet when not in use, before putting on or taking off
parts, and before cleaning or removing contents from blender jar.
Never put hands into the blender jar, or insert fingers
into dispenser tap hole, or handle the blades with appliance
plugged in.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the
appliance malfunctions, or is dropped or damaged in any manner.
Return appliance to nearest Cuisinart service facility for examination,
repair, and/or mechanical or electrical adjustment.
7. The use of attachments, including canning or ordinary jars, not
recommended or sold by Cuisinart may cause fire, electrical shock, or
risk of injury to persons.
8. Do not use outdoors.
9. Do not let cord hang over edge of counter or table or touch
hot surfaces.
10. Keep hands and utensils out of jar while blending, to reduce the
risk of severe injury to persons or damage to blender itself.
A rubber or plastic spatula may be used but must be used only when
the blender is turned OFF.
11. When blender is in ON mode, and LED lights are flashing or glowing,
do not touch cutting assembly, interfere with blade movement, or
remove blender jar cover. Accidentally touching a speed button may
activate the blender.
12. BLADES ARE SHARP. HANDLE CAREFULLY.
13. To reduce the risk of injury, never place cutting assembly on base
unless the blender jar is properly attached.
14. Always operate blender with the cover in place.
15. Never leave your blender unattended while running.
16. When blending HOT liquids, remove measured pour lid (center piece
of cover) to allow steam to escape.
17. Twist on locking ring firmly. Injury can result if moving blades
accidentally become exposed.
18. Do not use an extension cord with this unit. Doing so may result in fire,
electrical shock, or personal injury.
Regarding your cord set: A longer cord has been provided so that you will
have flexibility in positioning your Cuisinart
® Smooth Operator ® Blender near
an electrical outlet. Exercise care when using the longer cord, to avoid
entangling or tripping over the cord. The longer cord should be arranged so
that it will not drape over the counter or tabletop, where it can be pulled on
by children or tripped over. Excess cord should be stored in the cord stor-
age area at the back of the blender base to avoid injury caused by the
longer cord.
19. Wash the blender jar, locking ring with cutting assembly, dispenser tap,
dispenser plug and cover before first use.
20. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR
FIRE, DO NOT REMOVE THE BASE PANEL. NO USER SERVICE-
ABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY
AUTHORIZED PERSONNEL.
21. Always operate the blender with the dispenser tap or dispenser plug
in place.
22. Never place blade assembly on base unless assembled to jar.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOTICE
This appliance has a polarized plug (one prong is wider than the
other). To reduce the risk of electric shock, this plug will fit into a
polarized outlet only one way. If the plug does not fit fully into the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.