Cobalt Networks 9006 - Manual (Page 12)

Page 12 of 18 9006 Owner’s Manual
••••
(V 1.0)
Card Control and Status
Card Status
The card has an LED that indicates whether Dashboard remote control is enabled, or if the switch bank
controls the card. See description of switch 1 below.
The card also indicates the status of each of the outputs signal with the three banks of four LEDs
labeled with the different supported formats (1080, 720, 625, 525). When the card has locked to a
particular output format, that LED will be illuminated. When the card has not locked to a particular
video format, the card will search all possible formats, and the lights will cycle rapidly.
Switches
1) The bank of eight switches (S1) on the front edge that controls the card are reserved for future use.