Timer start mode, Anti jacking mode – CompuSTAR P1WAMR User Manual

Page 11

Advertising
background image

STEP 1: Turn on Option 3-10-III. (Dealer programmed option)

TEP 2: Turn ignition key to the “on” position.

TEP 3: Hold down the valet switch for 1.5 seconds. The LED on the valet switch will begin to flash

TEP 4: Enter the first digit of the desired two digit pass code by depressing the switch the number of

s,

TEP 5: The LED will confirm the first number by flashing BLUE slowly. Once the LED begins to flash

TEP 6: Turn the ignition off - the Secure Valet Switch is now programmed. Follow steps 3 – 5 to enter

Timer Start Mode


S

S
rapidly with successful completion of this step.

S
times that coordinates with the desired first number. For example, to enter 3, depress the switch 3 time
then wait.

S
rapidly, enter your second number by repeating step 4.

S
your Secure Valet code.

to cool or warm the vehicle without manually starting with the key or

Timer start mode is used
from the CompuStar remote. While engaged, timer start will activate even while the remote is

out of range. Tap buttons

simultaneously for 0.5 seconds to activate timer start mode.

Timer start mode will be ca

the vehicle is started manually or remotely. To change from

the default setting to optional settings, see your local CompuStar dealer.

ncelled any time

efault 1: Will start every 3 hours for a 24 hour cycle, or until the vehicle is remote started or started by

cycle, or until the vehicle is remote started or started by

Anti Jacking Mode

D
key, and run for 4 minutes (8 minutes for diesel).
Option 2: Will start every 1.5 hours for a 24 hour
key, and run for 4 minutes (8 minutes for diesel).

ave a built in mode that would require you to keep your remote separate from

The CompuStar systems h
your key chain. This feature also requires additional labor. Please consult your installer for more details.
The Anti Jacking mode allows you to safely disable your vehicle once a thief has driven off with your
property. If you are car jacked and still have your remote, you can panic the system by holding button

down for 4 seconds. The siren will sound for 30 seconds and the motor of the vehicle will shut

down.

11

Advertising
This manual is related to the following products: