Centrios 1611305 - Manual (Page 30)

28
EDITING
EDITING A DVD+RW OR DVD+R DISC
This icon is selected to view the disc information.
Play
PLAY (DVD+R and DVD+RW)
Highlight the icon and press ENTER. It will start to play the first title on the disc.
Erase Disc
ERASE DISK (VD+RW only)
Press ENTER to begin erasing.
Rename Disc
RENAME DISC (DVD+R and DVD+RW)
Highlight the icon and press ENTER. A keyboard will be displayed. Enter the disc name you
want, then move curser to OK button and press ENTER. The name of the disc will be changed.
Note: The maximum length of the disc name is 9 characters.
Finalize Disc
FINALIZE DISC (DVD+R only)
Highlight the icon and press ENTER. It will take a few minutes to finalize the disc.
Note:
• If a DVD+R disc has been finalized, you cannot record or edit the DVD+R any more.
• You must finalize a DVD+R to make the dsic compatible with other DVD players.
Record a New Title
RECORD A NEW TITLE (DVD+R and DVD+RW)
Highlight the icon and press ENTER. The unit will quit the disc operation mode and switch to the
monitor mode, thus, you could start the record operation.
Lock Disc
LOCK (DVD+RW only)
When the LOCK icon is displayed, it indicates you can lock the current disc. If you have locked
your disc, you can’t make any changes except to play it back. You can unlock by selecting
UNLOCK.
Note:
• A different interface will be displayed depending on the type of disc.
• Please check your unit and owner’s manual to obtain proper operating instructions.