Craftsman ASF 486.246222 - Manual (Page 5)

5 Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE
REF PART NO. QTY. DESCRIPTION
A 48894 2 Self Threading Screw, 3/8-16 x 1-1/2"
B 43062 2 Hex Bolt, 3/8-16 x 1-1/2"
C 43001 2 Hex Bolt, 3/8-16 x 1"
D 48866 2 Pivot Spacer
E 1643-60 2 Plastic Grip
F 43003 4 Lock Washer, 3/8"
G 43070 4 Washer, 3/8"
H 44742 4 Plug
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
STEP 1: (SEE FIGURE 2)
Open parts bags labelled " A" and "B" and verify that all
parts are present.
CAUTION! Muffler is hot! Allow engine to
cool down before proceeding with bumper
installation.
NOTE: Right hand (RH) and left hand (LH) are
determined from the operator's position while seated on
the tractor.
INSTRUCTIONS FOR DUAL SUSPENSION BRACKET TRACTORS
STEP 2: (SEE FIGURE 3)
• Remove tractor hood. (Refer to tractor manual.) Place
hood on cardboard or on a mat to protect paint.
• If you have an (LT) Lawn Tractor with a heat shield
like the one shown, remove the heat shield.
IMPORTANT: Be sure to re-attach the heat shield after
bumper is installed.
FIGURE 3
SHOWN FULL SIZE
PARTS BAG "B" EXCEPT WHERE NOTED
A C
G
D
B
H
E
F
(parts bag "A")
(parts bag "A") (parts bag "A")
(parts bag "A") FIGURE 2
MUFFLER HEAT SHIELD
(LT) LAWN TRACTOR