Cobra Electronics CP-2501 - Manual (Page 14)

REPLACING THE BATTERY
The rechargeable NiCad battery in your cordless phone may need to be re-
placed if the handset will not function when the TALK button is pressed after
recharging for 12 hours.
Replacement batteries are available direct from Cobra (see accessories order
form at the end of this booklet or call 1-773-889-3087).
NOTE: This product operates optimally with either a 2.4V, 300 mAh, NiCad
battery (supplied) or a 3.6V, 270 mAh NiCad battery (part number 213-013-9-
001).
BATTERY DISPOSAL
The rechargeable nickel cadmium (NiCad) battery in this product must be
recycled or disposed of properly in compliance with all applicable laws.
Certain states or municipalities require recycling and have established collec-
tion programs. Please contact your local waste removal authority for instruc-
tions, or return to Cobra for recycling. Wrap batteries carefully and mail
postage prepaid to:
Cobra Electronics Corporation
6500 W. Cortland Street
Chicago, IL 60707
Attn: Battery Recycling
DO NOT PUT BATTERIES INTO
FIRE OR EXPOSE TO HIGH HEAT.
THEY MAY EXPLODE.
CLEANING THE CHARGING CONTACTS
Clean the two metal charging contacts on the base and handset with a soft,
dry cloth on a regular basis to ensure optimum performance of the battery-
charging system. Rubbing alcohol may be used if more thorough cleaning is
required.
1. To remove the battery door, press
and slide downward.
2. Carefully disconnect the battery
pack and dispose of it properly.
See BATTERY DISPOSAL below.
3. To replace, connect the new bat-
tery and replace the door. Return
the handset to the base and
charge the battery overnight (at
least 12 hours).
"Contains Nickel-Cadmium Re-
chargeable Battery. Must be
recycled or disposed of proper-
13
Ni-Cd
RBRC
RBRC