Transmitter programming, Accidentally remote starting the vehicle – Crimestopper Security Products RS900ER User Manual

Page 8

Advertising
background image

accidentally remote starting the vehicle.

!! WARNING !!: Remove main power fuse before jump starting or charging a dead or low vehicle battery

TRANSMITTER PROGRAMMING

TRANSMITTER PROGRAMMING:

Note: All transmitter codes must be learned at time of programming!! The RS900 allows storage of up to 4
different transmitter codes.
1. Open Hood.
2. Turn key to the ON position. (Doors will lock if Autolock is programmed)
3. Press Programming button 4 times, then after a few seconds the unit flash the parking lights 4 times.
4. Press button #1 of the transmitter to be coded. You should get light flashes with each code learned. If all 4 code

locations are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood.

TRANSMITTER PROGRAMMING:

IGN

OFF

WAIT FOR

4 FLASHES

PRESS 4X's

FLASH

START

C

RIM E

S

TOPPER


CRIMESTOPPER SECURITY PRODUCTS, INC. 1770 SOUTH TAPO ST. SIMI VALLEY, CA. 93063

Advertising