Crown Equipment 4500 Series - Manual (Page 8)

OTHER LIFT HEIGHTS AND LOAD CENTERS
Contact Crown for capacities at lift heights or load centers
not given on your capacity plate.
Know the Hazards
TRUCK TYPE
Some truck types are not permitted in areas where there
are fire hazards. Watch for marked areas.
For example:
You must not drive a type E or ES truck into an area
restricted to EE or EX trucks.
TRUCK WEIGHT
Dockboards, elevators and some floors have limited
capacity. Check your capacity plate for the weight of
your truck. Remember to add the weight of the load you
have on the forks. Make certain you use the correct units
of measure.
ATTACHMENT DATA
If an attachment on your truck does not match the
information given on your capacity plate, don't operate
your truck. Your capacity plate may be wrong. Report
the problem to your supervisor.
Note: ANSI / ITSDF B56.1 requires that all data be shown
first in Metric units and then USA units.
Capacity with Mast Vertical
Serial Number
Attachment Data
Truck Weight with Max. Battery
Truck Type
Units of measure, kg/mm(lb/in)
620-A
4500
S E R I E S
Capacity
SC
4825(190) 1360(3000) 600(24)
1145(2520)
1090(2400)
1430(3150)
760(30)
760(30)
600(24) 4370(172)
4825(190)
4370(172)
3290(7250)
600(24)
Sideshifter-100(4)
12345678 E
Capacity Plate
SAMPLE
CAPACITY PLATE
The information
shown on this
sample plate does
not apply to your
truck.
CAPACITY PLATE INFORMATION
The capacity plate is on the overhead guard. It contains:
• Truck serial number
• Capacity information (load, load center and lift height)
• Truck type (a fire safety rating)
• Truck weight with battery (does not include load)
• Attachment information (if any)
READING YOUR CAPACITY PLATE
Capacity may be reduced as lift height increases.
For example: On the sample plate, 1405kg (3100 lb)
can be lifted to 4370mm (172 in). But above 4370 (172),
to 4825 (190), capacity is reduced from 1405 (3100) to
1360 (3000).
Capacity is reduced as load center increases.
For example: On the sample plate, 1405kg (3100 lb) can
be lifted if the load center is 600mm (24 in). But if the
load center is increased to 760mm (30), capacity is reduced
from 1405 (3100) to 1145 (2520).
Caution: You may not increase capacity if load center is
less than shown on your capacity plate.
13 Capacity Plate
SAMPLE
Capacity Plate 14