Cabletron Systems HSIM-F6 - Manual (Page 43)

The Ring Map Configuration Screen
HSIM-F6 User’s Guide 3-19
3.7.3 The Node Information Screen
The Ring Map Node Information screen provides information for each
selected node on the Ring Map Configuration screen.
To access the Node Information screen from the Ring Map Configuration
screen, use the arrow keys to highlight any node (FDDI address)
illustrated on the ring, and press ENTER. The Node Information screen,
Figure 3-12 , displays.
Figure 3-12 The Ring Map Node Information Screen
NOTE
The Ring Map Node Information screen reflects node status at
the time the node was selected. The Node Information screen
does not change dynamically with network topology changes.
Device Name: 6E132-25 Flash Image Revision: XX.XX.XX
Slot Number: X BOOTPROM Revision: XX.XX.XX
Ring Map NODE
209142
Selected Node
Address:
Upstream Address:
Node Class:
MAC Count:
Non-Master Count:
Master Count:
Peer Wrap:
Unattached Conc:
Twisted A-A:
Twisted B-B:
Synchronous Service:
Rooted: 00: 00: B8: 08: DB: 11
00: 00: B8: 08: F9: FA
DAS
1
2
0
NO
NO
NO
NO
NO
YES
EXIT RETURN