9 the full duplex configuration screen, The full duplex configuration screen -23 – Cabletron Systems HSIM-F6 User Manual
Page 47
The Full Duplex Configuration Screen
HSIM-F6 User’s Guide
3-23
3.9
THE FULL DUPLEX CONFIGURATION SCREEN
To access the Full Duplex Configuration screen from the HSIM-F6 Setup
screen, use the arrow keys to highlight the Full Duplex Configuration
menu item and press ENTER. The Full Duplex Configuration screen,
Figure 3-14
The FDDI Full Duplex Configuration Screen
NOTE
To configure the HSIM-F6 to operate in full duplex mode, two
FPIMs MUST be installed in the HSIM-F6.
Device Name: 6E132-25 Flash Image Revision: XX.XX.XX
Slot Number: X
BOOTPROM Revision: XX.XX.XX
FDDI Full Duplex Configuration
Operation Mode Link Status Port Status
FDDI PORT A
Standard FDDI Link
Enabled
FDDI PORT B
Standard FDDI Link
Enabled
EXIT
RETURN
SET OPERATION MODE: [STANDARD FDDI]
SAVE
DESIRED OPERATION MODE: [STANDARD FDDI]