Fpim specifications, A.1 fpim-00 and fpim-01, Appendix a – Cabletron Systems HSIM-F6 User Manual
Page 71: Appendix a fpim specifications
HSIM-F6 User’s Guide
A-1
APPENDIX A
FPIM SPECIFICATIONS
This appendix describes the FDDI Port Interface Modules (FPIMs).
A.1
FPIM-00 AND FPIM-01
The FPIM-00 and FPIM-01, shown in
, provide a multimode
fiber connection. The FPIM-00 uses a MIC style connector and the
FPIM-01 uses an SC type connector. The specifications for both devices
are listed in
.
The link distance is up to 2 kilometers on the multimode fiber optic cable
as specified by ANSI MMF-PMD.
Figure A-1
The FPIM-00 and FPIM-01
Table A-1
FPIM-00 and FPIM-01 Specifications
Parameter
Typical Value
Worst
Case
Worst
Case
Budget
Typical
Budget
Receive
Sensitivity
-30.5 dBm
-28.0 dBm
NA
NA
Peak Input
Power
-7.6 dBm
-8.2 dBm
NA
NA
50/125
µ
m fiber
-13.0 dBm
-15.0 dBm
13.0 dB
17.5 dB
62.5/125
µ
m
fiber
-10.0 dBm
-12.0 dBm
16.0 dB
20.5 dB
100/140
µ
m
fiber
-7.0 dBm
-9.0 dBm
19.0 dB
23.5 dB
Error Rate
Better than 10
10