Chicago Electric 41903 - Manual (Page 2)

SKU 41903 Page 2 For technical questions, please call 1-800-444-3353.
THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the
owner’s record below:
Model______________ Serial No.____________ Purchase Date__________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the entire
manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Tool Name: 6-1/2" 18V Circular Saw
SKU: 41903
Cutting Capacity: 2-1/16" @ 90 degrees, 1-1/2" @ 45 degrees
Motor RPM: 3,000 RPM
Arbor Size: 5/8"
Safety Switch: 2 Action
Blade: 6-1/2" X 24T C-2 Tip with Hardness 89-92 HRC
Max. Blade RPM: 7000
Also Included: Quick Charger with U.L. Approved Adapter, 18V Battery, 4 mm Hex Wrench,
Blow Mold Case.
Warning: The warnings, cautions and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that COMMON SENSE AND CAUTION ARE
FACTORS WHICH CANNOT BE BUILT INTO THIS PRODUCT, BUT
MUST BE SUPPLIED BY THE OPERATOR.
The Operator
PLEASE REMEMBER:
Do not operate the product if under the influence of alcohol or drugs. Read warning labels on prescriptions to determine
if your judgment/reflexes might be impaired.
Do not wear loose clothing or jewelry as they can be caught in moving
parts.
Protective gloves and nonskid footwear is recommended.
Wear restrictive hair covering to contain long hair.
Use eye and ear protection. Always wear ANSI approved impact
safety goggles and a dust mask or respirator when working around
metal, wood and chemical dusts and mists.
Wear a full face shield if you are producing metal or wood filings.
Maintain proper footing and balance at all times.
Keep hands out of the cutting area and away from the blade.
Make certain that the piece being cut is properly supported; do not support the piece being cut with your hands or by
bracing with your leg.
Avoid carrying the Saw with your fingers on the Handle. Your fingers may touch the Switch and Safety trigger and start
the Saw.
REV 02/01; 10/03; 12/04; 02/05
WARNING: Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities, contain chemicals
known [to the State of California] to cause
cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
•
Lead from lead-based paints
• Crystalline silica from bricks and
cement or other masonry products
• Arsenic and chromium from
chemically treated lumber
(California Health & Safety Code 25249.5, et
seq. )