Casablanca Fan Company CASABLANCA Wilderness CEILING FAN 86UxxM - Manual (Page 5)

5
W
ilderness
™
CANOPY LOCK wASHER (4)
CANOPY SCREw (4)
Step 3. Pass the lag screw through the center hole of the
crosbar mounting bracket and screw into guide hole. Tighten
until outlet box is firmly mounted to beam. This box must
be firmly secured to the ceiling. We recommend that the
ceiling fixture outlet box be of sufficient capacity enabling
it to support the weight of fan and light fixture under any
conditions.
LAg
SCREw
CANOPY
CANOPY
HATCH
note: On sloped ceilings, align the
canopy opening towards the top or
room peak.
Step 4. Attach the canopy to the crossbar mounting bracket
with three of the 8-32 x 2 1 / 4
″ long canopy screws and canopy
lock washers. Tighten the screw firmly by hand only.
LAG SCREW INSTALLATION
CANOPY HARDWARE
CANOPY INSTALLATION
CANOPY
SCREw
CANOPY
LOCK
wASHER
FEED OUTLET BOX
wIRES THROUgH
CANOPY OPENINg